Stingray

Optimised for body-worn applications, low profile, magnetic mating connectors.

Key features
  • Magnetic mating mechanism  
  • Non-keyed rotatable ‘blind mating’ 
  • Wipe clean interface featuring sprung-loaded pogo contacts 
  • 5000+ mating cycles   
  • Compatible with Power, USB 2.0 and Audio signal requirements 
  • 90° cable exit within the height of the connector 
  • IP68 sealed when supplied with overmoulded cable (mated and unmated)
Applications
  • First Responders, Security services, Military personnel communications
  • Body worn systems
  • Medical monitoring equipment
Technical informations
  • Operating temperature range -55°C to +85°C
  • Easy cleaning and decontamination
  • Increased connector life before replacement
  • Last Mate, First Break contact
  • Current rating 3A per contact continuous, 5A per contact peak
  • Insulation resistance 5000 MΩ at 500 VDC
  • Contact resistance <20 mΩ
  • Sealing IP68, 1hr at 2 meters immersion
  • Salt spray 500 hours, 5% NaCl (mated)
  • RoHS compliant (dependent on solder used)
  • 5000 mating cycles minimum
  • Shock and vibration in accordance with DEF-STAN 00-35 Iss 4 Ch2 01 test M1 appendix A figs A22-High Level and A23-Low Level
  • Separation force, peel 4.0N typical
  • Rotations 1000 minimum
  • Rotational torque 0.7Nm typical
Stingray is a low profile, compact and sealed connector that sits flat against the body to prevent snagging and damage. It is self-aligning due to its strong magnetic connection and allows customisation and flexibility of cable routing. It features a magnetic, non-keyed mating system which allows the connector to be easily mated without the need for pre-alignment and eliminates the need to operate any coupling mechanisms.

Resources

Stingray 7 Datasheet

Last update : Thu, 03/11/2021 - 12:49

Stingray Catalogue

Last update : Thu, 02/25/2021 - 17:24

Stingray_Shortform_2018

Last update : Thu, 08/09/2018 - 02:16

No entries for this content

No entries for this content

No entries for this content